# Available parameters and their default values for the Consul chart.

# global holds values that affect multiple components of the chart.
global:
  # enabled is the master enabled/disabled setting.
  # If true, servers, clients, Consul DNS and the Consul UI will be enabled.
  # Each component can override this default via its component-specific
  # "enabled" config.
  # If false, no components will be installed by default and per-component
  # opt-in is required, such as by setting `server.enabled` to true.
  enabled: true

  # name sets the prefix used for all resources in the helm chart.
  # If not set, the prefix will be "<helm release name>-consul".
  name: null

  # domain is the domain Consul will answer DNS queries for
  # (see https://www.consul.io/docs/agent/options.html#_domain) and the domain
  # services synced from Consul into Kubernetes will have,
  # e.g. `service-name.service.consul`.
  domain: consul

  # image is the name (and tag) of the Consul Docker image for clients and
  # servers. This can be overridden per component.
  # This should be pinned to a specific version tag, otherwise you may
  # inadvertently upgrade your Consul version.
  #
  # Examples:
  #   # Consul 1.5.0
  #   image: "consul:1.5.0"
  #   # Consul Enterprise 1.5.0
  #   image: "hashicorp/consul-enterprise:1.5.0-ent"
  image: "consul:1.7.1"

  # imageK8S is the name (and tag) of the consul-k8s Docker image that
  # is used for functionality such as catalog sync. This can be overridden
  # per component.
  # Note: support for the catalog sync's liveness and readiness probes was added
  # to consul-k8s 0.6.0. If using an older consul-k8s version, you may need to
  # remove these checks to make the sync work.
  # If using bootstrapACLs then must be >= 0.10.1.
  # If using connect inject then must be >= 0.10.1.
  # If using Consul Enterprise namespaces, must be >= 0.12.
  imageK8S: "hashicorp/consul-k8s:0.12.0"

  # datacenter is the name of the datacenter that the agents should register
  # as. This can't be changed once the Consul cluster is up and running
  # since Consul doesn't support an automatic way to change this value
  # currently: https://github.com/hashicorp/consul/issues/1858.
  datacenter: dc1

  # enablePodSecurityPolicies controls whether pod
  # security policies are created for the Consul components created by this
  # chart. See https://kubernetes.io/docs/concepts/policy/pod-security-policy/.
  enablePodSecurityPolicies: false

  # gossipEncryption configures which Kubernetes secret to retrieve Consul's
  # gossip encryption key from (see https://www.consul.io/docs/agent/options.html#_encrypt).
  # If secretName or secretKey are not set, gossip encryption will not be enabled.
  # The secret must be in the same namespace that Consul is installed into.
  #
  # The secret can be created by running:
  #    kubectl create secret generic consul-gossip-encryption-key \
  #      --from-literal=key=$(consul keygen).
  #
  # In this case, secretName would be "consul-gossip-encryption-key" and
  # secretKey would be "key".
  gossipEncryption:
    # secretName is the name of the Kubernetes secret that holds the gossip
    # encryption key. The secret must be in the same namespace that Consul is installed into.
    secretName: ""
    # secretKey is the key within the Kubernetes secret that holds the gossip
    # encryption key.
    secretKey: ""

  # bootstrapACLs will automatically create and assign ACL tokens within
  # the Consul cluster. This requires servers to be running inside Kubernetes.
  # Additionally requires Consul >= 1.4 and consul-k8s >= 0.10.1.
  bootstrapACLs: false

  # Enables TLS encryption across the cluster to verify authenticity of the
  # servers and clients that connect. Note: It is HIGHLY recommended that you also
  # enable Gossip encryption.
  # See https://learn.hashicorp.com/consul/security-networking/agent-encryption
  #
  # Note: this relies on functionality introduced with Consul 1.4.1. Make sure
  # your global.image value is at least version 1.4.1.
  tls:
    enabled: false

    # serverAdditionalDNSSANs is a list of additional DNS names to
    # set as Subject Alternative Names (SANs) in the server certificate.
    # This is useful when you need to access the Consul server(s) externally,
    # for example, if you're using the UI.
    serverAdditionalDNSSANs: []

    # serverAdditionalIPSANs is a list of additional IP addresses to
    # set as Subject Alternative Names (SANs) in the server certificate.
    # This is useful when you need to access Consul server(s) externally,
    # for example, if you're using the UI.
    serverAdditionalIPSANs: []

    # If verify is true, 'verify_outgoing', 'verify_server_hostname', and
    # 'verify_incoming_rpc' will be set to true for Consul servers and clients.
    # Set this to false to incrementally roll out TLS on an existing Consul cluster.
    # Note: remember to switch it back to true once the rollout is complete.
    # Please see this guide for more details:
    # https://learn.hashicorp.com/consul/security-networking/certificates
    verify: true

    # If httpsOnly is true, Consul will disable the HTTP port on both
    # clients and servers and only accept HTTPS connections.
    httpsOnly: true

    # caCert is a Kubernetes secret containing the certificate
    # of the CA to use for TLS communication within the Consul cluster.
    # If you have generated the CA yourself with the consul CLI,
    # you could use the following command to create the secret in Kubernetes:
    #
    #   kubectl create secret generic consul-ca-cert \
    #           --from-file='tls.crt=./consul-agent-ca.pem'
    caCert:
      secretName: null
      secretKey: null

    # caKey is a Kubernetes secret containing the private key
    # of the CA to use for TLS communications within the Consul cluster.
    # If you have generated the CA yourself with the consul CLI,
    # you could use the following command to create the secret in Kubernetes:
    #
    #   kubectl create secret generic consul-ca-key \
    #           --from-file='tls.key=./consul-agent-ca-key.pem'
    #
    # Note that we need the CA key so that we can generate server and client certificates.
    # It is particularly important for the client certificates since they need to have host IPs
    # as Subject Alternative Names. In the future, we may support bringing your own server
    # certificates.
    caKey:
      secretName: null
      secretKey: null

  # [Enterprise Only] enableConsulNamespaces indicates that you are running
  # Consul Enterprise v1.7+ with a valid Consul Enterprise license and would like to
  # make use of configuration beyond registering everything into the `default` Consul
  # namespace. Requires consul-k8s v0.12+.
  # Additional configuration options are found in the `consulNamespaces` section
  # of both the catalog sync and connect injector.
  enableConsulNamespaces: false

# Server, when enabled, configures a server cluster to run. This should
# be disabled if you plan on connecting to a Consul cluster external to
# the Kube cluster.
server:
  enabled: "-"
  image: null
  replicas: 3
  bootstrapExpect: 3 # Should <= replicas count

  # enterpriseLicense refers to a Kubernetes secret that you have created that
  # contains your enterprise license. It is required if you are using an
  # enterprise binary. Defining it here applies it to your cluster once a leader
  # has been elected. If you are not using an enterprise image
  # or if you plan to introduce the license key via another route, then set
  # these fields to null.
  enterpriseLicense:
    secretName: null
    secretKey: null

  # storage and storageClass are the settings for configuring stateful
  # storage for the server pods. storage should be set to the disk size of
  # the attached volume. storageClass is the class of storage which defaults
  # to null (the Kube cluster will pick the default).
  storage: 10Gi
  storageClass: null

  # connect will enable Connect on all the servers, initializing a CA
  # for Connect-related connections. Other customizations can be done
  # via the extraConfig setting.
  connect: true

  # Resource requests, limits, etc. for the server cluster placement. This
  # should map directly to the value of the resources field for a PodSpec,
  # formatted as a multi-line string. By default no direct resource request
  # is made.
  resources: null

  # updatePartition is used to control a careful rolling update of Consul
  # servers. This should be done particularly when changing the version
  # of Consul. Please refer to the documentation for more information.
  updatePartition: 0

  # disruptionBudget enables the creation of a PodDisruptionBudget to
  # prevent voluntary degrading of the Consul server cluster.
  disruptionBudget:
    enabled: true

    # maxUnavailable will default to (n/2)-1 where n is the number of
    # replicas. If you'd like a custom value, you can specify an override here.
    maxUnavailable: null

  # extraConfig is a raw string of extra configuration to set with the
  # server. This should be JSON.
  extraConfig: |
    {}

  # extraVolumes is a list of extra volumes to mount. These will be exposed
  # to Consul in the path `/consul/userconfig/<name>/`. The value below is
  # an array of objects, examples are shown below.
  extraVolumes: []
    # - type: secret (or "configMap")
    #   name: my-secret
    #   load: false # if true, will add to `-config-dir` to load by Consul

  # Affinity Settings
  # Commenting out or setting as empty the affinity variable, will allow
  # deployment to single node services such as Minikube
  affinity: |
    podAntiAffinity:
      requiredDuringSchedulingIgnoredDuringExecution:
        - labelSelector:
            matchLabels:
              app: {{ template "consul.name" . }}
              release: "{{ .Release.Name }}"
              component: server
          topologyKey: kubernetes.io/hostname

  # Toleration Settings for server pods
  # This should be a multi-line string matching the Toleration array
  # in a PodSpec.
  tolerations: ""

  # nodeSelector labels for server pod assignment, formatted as a multi-line string.
  # ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#nodeselector
  # Example:
  # nodeSelector: |
  #   beta.kubernetes.io/arch: amd64
  nodeSelector: null

  # used to assign priority to server pods
  # ref: https://kubernetes.io/docs/concepts/configuration/pod-priority-preemption/
  priorityClassName: ""

  # Extra annotations to attach to the server pods
  # This should be a multi-line string mapping directly to the a map of
  # the annotations to apply to the server pods
  annotations: null

  # extraEnvVars is a list of extra environment variables to set with the stateful set. These could be
  # used to include proxy settings required for cloud auto-join feature,
  # in case kubernetes cluster is behind egress http proxies. Additionally, it could be used to configure
  # custom consul parameters.
  extraEnvironmentVars: {}
    # http_proxy: http://localhost:3128,
    # https_proxy: http://localhost:3128,
    # no_proxy: internal.domain.com

# Client, when enabled, configures Consul clients to run on every node
# within the Kube cluster. The current deployment model follows a traditional
# DC where a single agent is deployed per node.
client:
  enabled: "-"
  image: null
  join: null

  # dataDirectoryHostPath is an absolute path to a directory on the host machine
  # to use as the Consul client data directory.
  # If set to the empty string or null, the Consul agent will store its data
  # in the Pod's local filesystem (which will be lost if the Pod is deleted).
  # Security Warning: If setting this, Pod Security Policies *must* be enabled on your cluster
  # and in this Helm chart (via the global.enablePodSecurityPolicies setting)
  # to prevent other Pods from mounting the same host path and gaining
  # access to all of Consul's data. Consul's data is not encrypted at rest.
  dataDirectoryHostPath: null

  # If true, Consul's gRPC port will be exposed (see https://www.consul.io/docs/agent/options.html#grpc_port).
  # This should be set to true if connectInject or meshGateway is enabled.
  grpc: true

  # exposeGossipPorts exposes the clients' gossip ports as hostPorts.
  # This is only necessary if pod IPs in the k8s cluster are not directly
  # routable and the Consul servers are outside of the k8s cluster. This
  # also changes the clients' advertised IP to the hostIP rather than podIP.
  exposeGossipPorts: false

  # Resource requests, limits, etc. for the client cluster placement. This
  # should map directly to the value of the resources field for a PodSpec,
  # formatted as a multi-line string. By default no direct resource request
  # is made.
  resources: null

  # extraConfig is a raw string of extra configuration to set with the
  # client. This should be JSON.
  extraConfig: |
    {}

  # extraVolumes is a list of extra volumes to mount. These will be exposed
  # to Consul in the path `/consul/userconfig/<name>/`. The value below is
  # an array of objects, examples are shown below.
  extraVolumes: []
    # - type: secret (or "configMap")
    #   name: my-secret
    #   load: false # if true, will add to `-config-dir` to load by Consul

  # Toleration Settings for Client pods
  # This should be a multi-line string matching the Toleration array
  # in a PodSpec.
  # The example below will allow Client pods to run on every node
  # regardless of taints
  # tolerations: |
  #   - operator: "Exists"
  tolerations: ""

  # nodeSelector labels for client pod assignment, formatted as a multi-line string.
  # ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#nodeselector
  # Example:
  # nodeSelector: |
  #   beta.kubernetes.io/arch: amd64
  nodeSelector: null

  # Affinity Settings for Client pods, formatted as a multi-line YAML string.
  # ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
  # Example:
  # affinity: |
  #   nodeAffinity:
  #     requiredDuringSchedulingIgnoredDuringExecution:
  #       nodeSelectorTerms:
  #       - matchExpressions:
  #         - key: node-role.kubernetes.io/master
  #           operator: DoesNotExist
  affinity: {}

  # used to assign priority to client pods
  # ref: https://kubernetes.io/docs/concepts/configuration/pod-priority-preemption/
  priorityClassName: ""

  # Extra annotations to attach to the client pods
  # This should be a multi-line string mapping directly to the a map of
  # the annotations to apply to the client pods
  annotations: null

  # extraEnvVars is a list of extra environment variables to set with the pod. These could be
  # used to include proxy settings required for cloud auto-join feature,
  # in case kubernetes cluster is behind egress http proxies. Additionally, it could be used to configure
  # custom consul parameters.
  extraEnvironmentVars: {}
    # http_proxy: http://localhost:3128,
    # https_proxy: http://localhost:3128,
    # no_proxy: internal.domain.com

  # dnsPolicy to use.
  dnsPolicy: null

  # updateStrategy for the DaemonSet.
  # See https://kubernetes.io/docs/tasks/manage-daemon/update-daemon-set/#daemonset-update-strategy.
  # This should be a multi-line string mapping directly to the updateStrategy
  # Example:
  #  updateStrategy: |
  #    rollingUpdate:
  #      maxUnavailable: 5
  #    type: RollingUpdate
  updateStrategy: null

  # snapshotAgent contains settings for setting up and running snapshot agents
  # within the Consul clusters. They are required to be co-located with Consul
  # clients, so will inherit the clients' nodeSelector, tolerations and affinity.
  # This is an Enterprise feature only.
  snapshotAgent:
    enabled: false

    # replicas determines how many snapshot agent pods are created
    replicas: 2

    # configSecret references a Kubernetes secret that should be manually created to
    # contain the entire config to be used on the snapshot agent. This is the preferred
    # method of configuration since there are usually storage credentials present.
    # Snapshot agent config details:
    # https://www.consul.io/docs/commands/snapshot/agent.html#config-file-options-
    # To create a secret:
    # https://kubernetes.io/docs/concepts/configuration/secret/#creating-a-secret-using-kubectl-create-secret
    configSecret:
      secretName: null
      secretKey: null

# Configuration for DNS configuration within the Kubernetes cluster.
# This creates a service that routes to all agents (client or server)
# for serving DNS requests. This DOES NOT automatically configure kube-dns
# today, so you must still manually configure a `stubDomain` with kube-dns
# for this to have any effect:
# https://kubernetes.io/docs/tasks/administer-cluster/dns-custom-nameservers/#configure-stub-domain-and-upstream-dns-servers
dns:
  enabled: "-"

  # Set a predefined cluster IP for the DNS service.
  # Useful if you need to reference the DNS service's IP
  # address in CoreDNS config.
  clusterIP: null

  # Extra annotations to attach to the dns service
  # This should be a multi-line string of
  # annotations to apply to the dns Service
  annotations: null

ui:
  # True if you want to enable the Consul UI. The UI will run only
  # on the server nodes. This makes UI access via the service below (if
  # enabled) predictable rather than "any node" if you're running Consul
  # clients as well.
  enabled: "-"

  # True if you want to create a Service entry for the Consul UI.
  #
  # serviceType can be used to control the type of service created. For
  # example, setting this to "LoadBalancer" will create an external load
  # balancer (for supported K8S installations) to access the UI.
  service:
    enabled: true
    type: null
    # This should be a multi-line string mapping directly to the a map of
    # the annotations to apply to the UI service
    annotations: null
    # Additional ServiceSpec values
    # This should be a multi-line string mapping directly to a Kubernetes
    # ServiceSpec object.
    additionalSpec: null

# syncCatalog will run the catalog sync process to sync K8S with Consul
# services. This can run bidirectional (default) or unidirectionally (Consul
# to K8S or K8S to Consul only).
#
# This process assumes that a Consul agent is available on the host IP.
# This is done automatically if clients are enabled. If clients are not
# enabled then set the node selection so that it chooses a node with a
# Consul agent.
syncCatalog:
  # True if you want to enable the catalog sync. Set to "-" to inherit from
  # global.enabled.
  enabled: false
  image: null
  default: true # true will sync by default, otherwise requires annotation

  # toConsul and toK8S control whether syncing is enabled to Consul or K8S
  # as a destination. If both of these are disabled, the sync will do nothing.
  toConsul: true
  toK8S: true

  # k8sPrefix is the service prefix to prepend to services before registering
  # with Kubernetes. For example "consul-" will register all services
  # prepended with "consul-". (Consul -> Kubernetes sync)
  k8sPrefix: null

  # k8sAllowNamespaces is a list of k8s namespaces to sync the k8s services from.
  # If a k8s namespace is not included  in this list or is listed in `k8sDenyNamespaces`,
  # services in that k8s namespace will not be synced even if they are explicitly
  # annotated. Use ["*"] to automatically allow all k8s namespaces.
  #
  # For example, ["namespace1", "namespace2"] will only allow services in the k8s
  # namespaces `namespace1` and `namespace2` to be synced and registered
  # with Consul. All other k8s namespaces will be ignored.
  #
  # To deny all namespaces, set this to [].
  #
  # Note: `k8sDenyNamespaces` takes precedence over values defined here.
  # Requires consul-k8s v0.12+
  k8sAllowNamespaces: ["*"]

  # k8sDenyNamespaces is a list of k8s namespaces that should not have their
  # services synced. This list takes precedence over `k8sAllowNamespaces`.
  # `*` is not supported because then nothing would be allowed to sync.
  # Requires consul-k8s v0.12+.
  #
  # For example, if `k8sAllowNamespaces` is `["*"]` and `k8sDenyNamespaces` is
  # `["namespace1", "namespace2"]`, then all k8s namespaces besides "namespace1"
  # and "namespace2" will be synced.
  k8sDenyNamespaces: ["kube-system", "kube-public"]

  # [DEPRECATED] Use k8sAllowNamespaces and k8sDenyNamespaces instead. For
  # backwards compatibility, if both this and the allow/deny lists are set,
  # the allow/deny lists will be ignored.
  # k8sSourceNamespace is the Kubernetes namespace to watch for service
  # changes and sync to Consul. If this is not set then it will default
  # to all namespaces.
  k8sSourceNamespace: null

  # [Enterprise Only] These settings manage the catalog sync's interaction with
  # Consul namespaces (requires consul-ent v1.7+ and consul-k8s v0.12+).
  # Also, `global.enableConsulNamespaces` must be true.
  consulNamespaces:
    # consulDestinationNamespace is the name of the Consul namespace to register all
    # k8s services into. If the Consul namespace does not already exist,
    # it will be created. This will be ignored if `mirroringK8S` is true.
    consulDestinationNamespace: "default"

    # mirroringK8S causes k8s services to be registered into a Consul namespace
    # of the same name as their k8s namespace, optionally prefixed if
    # `mirroringK8SPrefix` is set below. If the Consul namespace does not
    # already exist, it will be created. Turning this on overrides the
    # `consulDestinationNamespace` setting.
    # `addK8SNamespaceSuffix` may no longer be needed if enabling this option.
    mirroringK8S: false

    # If `mirroringK8S` is set to true, `mirroringK8SPrefix` allows each Consul namespace
    # to be given a prefix. For example, if `mirroringK8SPrefix` is set to "k8s-", a
    # service in the k8s `staging` namespace will be registered into the
    # `k8s-staging` Consul namespace.
    mirroringK8SPrefix: ""

  # addK8SNamespaceSuffix appends Kubernetes namespace suffix to
  # each service name synced to Consul, separated by a dash.
  # For example, for a service 'foo' in the default namespace,
  # the sync process will create a Consul service named 'foo-default'.
  # Set this flag to true to avoid registering services with the same name
  # but in different namespaces as instances for the same Consul service.
  # Namespace suffix is not added if 'annotationServiceName' is provided.
  addK8SNamespaceSuffix: true

  # consulPrefix is the service prefix which prepends itself
  # to Kubernetes services registered within Consul
  # For example, "k8s-" will register all services prepended with "k8s-".
  # (Kubernetes -> Consul sync)
  # consulPrefix is ignored when 'annotationServiceName' is provided.
  # NOTE: Updating this property to a non-null value for an existing installation will result in deregistering
  # of existing services in Consul and registering them with a new name.
  consulPrefix: null

  # k8sTag is an optional tag that is applied to all of the Kubernetes services
  # that are synced into Consul. If nothing is set, defaults to "k8s".
  # (Kubernetes -> Consul sync)
  k8sTag: null

  # syncClusterIPServices syncs services of the ClusterIP type, which may
  # or may not be broadly accessible depending on your Kubernetes cluster.
  # Set this to false to skip syncing ClusterIP services.
  syncClusterIPServices: true

  # nodePortSyncType configures the type of syncing that happens for NodePort
  # services. The valid options are: ExternalOnly, InternalOnly, ExternalFirst.
  # - ExternalOnly will only use a node's ExternalIP address for the sync
  # - InternalOnly use's the node's InternalIP address
  # - ExternalFirst will preferentially use the node's ExternalIP address, but
  #   if it doesn't exist, it will use the node's InternalIP address instead.
  nodePortSyncType: ExternalFirst

  # aclSyncToken refers to a Kubernetes secret that you have created that contains
  # an ACL token for your Consul cluster which allows the sync process the correct
  # permissions. This is only needed if ACLs are enabled on the Consul cluster.
  aclSyncToken:
    secretName: null
    secretKey: null

  # nodeSelector labels for syncCatalog pod assignment, formatted as a multi-line string.
  # ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#nodeselector
  # Example:
  # nodeSelector: |
  #   beta.kubernetes.io/arch: amd64
  nodeSelector: null

  # Log verbosity level. One of "trace", "debug", "info", "warn", or "error".
  logLevel: info

  # Override the default interval to perform syncing operations creating Consul services.
  consulWriteInterval: null

# ConnectInject will enable the automatic Connect sidecar injector.
connectInject:
  # True if you want to enable connect injection. Set to "-" to inherit from
  # global.enabled.
  # Requires consul-k8s >= 0.10.1.
  enabled: false
  image: null # image for consul-k8s that contains the injector
  default: false # true will inject by default, otherwise requires annotation

  # The Docker image for Consul to use when performing Connect injection.
  # Defaults to global.image.
  imageConsul: null

  # The Docker image for envoy to use as the proxy sidecar when performing
  # Connect injection. If using Consul 1.7+, the envoy version must be 1.13+.
  # If not set, the image used depends on the consul-k8s version. For
  # consul-k8s 0.12.0 the default is envoyproxy/envoy-alpine:v1.13.0.
  imageEnvoy: null

  # namespaceSelector is the selector for restricting the webhook to only
  # specific namespaces. This should be set to a multiline string.
  # See https://kubernetes.io/docs/reference/access-authn-authz/extensible-admission-controllers/#matching-requests-namespaceselector
  # for more details.
  # Example:
  # namespaceSelector: |
  #   matchLabels:
  #     namespace-label: label-value
  namespaceSelector: null

  # k8sAllowNamespaces is a list of k8s namespaces to allow Connect sidecar
  # injection in. If a k8s namespace is not included or is listed in `k8sDenyNamespaces`,
  # pods in that k8s namespace will not be injected even if they are explicitly
  # annotated. Use ["*"] to automatically allow all k8s namespaces.
  #
  # For example, ["namespace1", "namespace2"] will only allow pods in the k8s
  # namespaces `namespace1` and `namespace2` to have Connect sidecars injected
  # and registered with Consul. All other k8s namespaces will be ignored.
  #
  # To deny all namespaces, set this to [].
  #
  # Note: `k8sDenyNamespaces` takes precedence over values defined here and
  # `namespaceSelector` takes precedence over both since it is applied first.
  # `kube-system` and `kube-public` are never injected, even if included here.
  # Requires consul-k8s v0.12+
  k8sAllowNamespaces: ["*"]

  # k8sDenyNamespaces is a list of k8s namespaces that should not allow Connect
  # sidecar injection. This list takes precedence over `k8sAllowNamespaces`.
  # `*` is not supported because then nothing would be allowed to be injected.
  #
  # For example, if `k8sAllowNamespaces` is `["*"]` and k8sDenyNamespaces is
  # `["namespace1", "namespace2"]`, then all k8s namespaces besides "namespace1"
  # and "namespace2" will be available for injection.
  #
  # Note: `namespaceSelector` takes precedence over this since it is applied first.
  # `kube-system` and `kube-public` are never injected.
  # Requires consul-k8s v0.12+.
  k8sDenyNamespaces: []

  # [Enterprise Only] These settings manage the connect injector's interaction with
  # Consul namespaces (requires consul-ent v1.7+ and consul-k8s v0.12+).
  # Also, `global.enableConsulNamespaces` must be true.
  consulNamespaces:
    # consulDestinationNamespace is the name of the Consul namespace to register all
    # k8s pods into. If the Consul namespace does not already exist,
    # it will be created. This will be ignored if `mirroringK8S` is true.
    consulDestinationNamespace: "default"

    # mirroringK8S causes k8s pods to be registered into a Consul namespace
    # of the same name as their k8s namespace, optionally prefixed if
    # `mirroringK8SPrefix` is set below. If the Consul namespace does not
    # already exist, it will be created. Turning this on overrides the
    # `consulDestinationNamespace` setting.
    mirroringK8S: false

    # If `mirroringK8S` is set to true, `mirroringK8SPrefix` allows each Consul namespace
    # to be given a prefix. For example, if `mirroringK8SPrefix` is set to "k8s-", a
    # pod in the k8s `staging` namespace will be registered into the
    # `k8s-staging` Consul namespace.
    mirroringK8SPrefix: ""

  # The certs section configures how the webhook TLS certs are configured.
  # These are the TLS certs for the Kube apiserver communicating to the
  # webhook. By default, the injector will generate and manage its own certs,
  # but this requires the ability for the injector to update its own
  # MutatingWebhookConfiguration. In a production environment, custom certs
  # should probably be used. Configure the values below to enable this.
  certs:
    # secretName is the name of the secret that has the TLS certificate and
    # private key to serve the injector webhook. If this is null, then the
    # injector will default to its automatic management mode that will assign
    # a service account to the injector to generate its own certificates.
    secretName: null

    # caBundle is a base64-encoded PEM-encoded certificate bundle for the
    # CA that signed the TLS certificate that the webhook serves. This must
    # be set if secretName is non-null.
    caBundle: ""

    # certName and keyName are the names of the files within the secret for
    # the TLS cert and private key, respectively. These have reasonable
    # defaults but can be customized if necessary.
    certName: tls.crt
    keyName: tls.key

  # nodeSelector labels for connectInject pod assignment, formatted as a multi-line string.
  # ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#nodeselector
  # Example:
  # nodeSelector: |
  #   beta.kubernetes.io/arch: amd64
  nodeSelector: null

  # aclBindingRuleSelector accepts a query that defines which Service Accounts
  # can authenticate to Consul and receive an ACL token during Connect injection.
  # The default setting, i.e. serviceaccount.name!=default, prevents the
  # 'default' Service Account from logging in.
  # If set to an empty string all service accounts can log in.
  # This only has effect if ACLs are enabled.
  #
  # See https://www.consul.io/docs/acl/acl-auth-methods.html#binding-rules
  # and https://www.consul.io/docs/acl/auth-methods/kubernetes.html#trusted-identity-attributes
  # for more details.
  # Requires Consul >= v1.5 and consul-k8s >= v0.8.0.
  aclBindingRuleSelector: "serviceaccount.name!=default"

  # If not using global.bootstrapACLs and instead manually setting up an auth
  # method for Connect inject, set this to the name of your auth method.
  overrideAuthMethodName: ""

  # aclInjectToken refers to a Kubernetes secret that you have created that contains
  # an ACL token for your Consul cluster which allows the Connect injector the correct
  # permissions. This is only needed if Consul namespaces [Enterprise only] and ACLs
  # are enabled on the Consul cluster and you are not setting `global.bootstrapACLs`
  # to `true`. This token needs to have `operator = "write"` privileges to be able to
  # create Consul namespaces.
  aclInjectToken:
    secretName: null
    secretKey: null

  # Requires Consul >= v1.5 and consul-k8s >= v0.8.1.
  centralConfig:
    # enabled controls whether central config is enabled on all servers and clients.
    # See https://www.consul.io/docs/agent/options.html#enable_central_service_config.
    # If changing this after installation, servers and clients must be restarted
    # for the change to take effect.
    enabled: true

    # defaultProtocol allows you to specify a convenience default protocol if
    # most of your services are of the same protocol type. The individual annotation
    # on any given pod will override this value.
    # Valid values are "http", "http2", "grpc" and "tcp".
    defaultProtocol: null

    # proxyDefaults is a raw json string that will be written as the value of
    # the "config" key of the global proxy-defaults config entry.
    # See: https://www.consul.io/docs/agent/config-entries/proxy-defaults.html
    # NOTE: Changes to this value after the chart is first installed have *no*
    # effect. In order to change the proxy-defaults config after installation,
    # you must use the Consul API.
    proxyDefaults: |
      {}

# Mesh Gateways enable Consul Connect to work across Consul datacenters.
meshGateway:
  # If mesh gateways are enabled, a Deployment will be created that runs
  # gateways and Consul Connect will be configured to use gateways.
  # See https://www.consul.io/docs/connect/mesh_gateway.html
  # Requirements: consul >= 1.6.0 and consul-k8s >= 0.9.0 if using global.bootstrapACLs.
  enabled: false

  # Globally configure which mode the gateway should run in.
  # Can be set to either "remote", "local", "none" or empty string or null.
  # See https://consul.io/docs/connect/mesh_gateway.html#modes-of-operation for
  # a description of each mode.
  # If set to anything other than "" or null, connectInject.centralConfig.enabled
  # should be set to true so that the global config will actually be used.
  # If set to the empty string, no global default will be set and the gateway mode
  # will need to be set individually for each service.
  globalMode: local

  # Number of replicas for the Deployment.
  replicas: 2

  # What gets registered as wan address for the gateway.
  wanAddress:
    # Port that gets registered.
    port: 443

    # If true, each Gateway Pod will advertise its NodeIP
    # (as provided by the Kubernetes downward API) as the wan address.
    # This is useful if the node IPs are routable from other DCs.
    # useNodeName and host must be false and "" respectively.
    useNodeIP: true

    # If true, each Gateway Pod will advertise its NodeName
    # (as provided by the Kubernetes downward API) as the wan address.
    # This is useful if the node names are DNS entries that are
    # routable from other DCs.
    # meshGateway.wanAddress.port will be used as the port for the wan address.
    # useNodeIP and host must be false and "" respectively.
    useNodeName: false

    # If set, each gateway Pod will use this host as its wan address.
    # Users must ensure that this address routes to the Gateway pods,
    # for example via a DNS entry that routes to the Service fronting the Deployment.
    # meshGateway.wanAddress.port will be used as the port for the wan address.
    # useNodeIP and useNodeName must be false.
    host: ""

  # The service option configures the Service that fronts the Gateway Deployment.
  service:
    # Whether to create a Service or not.
    enabled: false

    # Type of service, ex. LoadBalancer, ClusterIP.
    type: ClusterIP

    # Port that the service will be exposed on.
    # The targetPort will be set to meshGateway.containerPort.
    port: 443

    # Optional nodePort of the service. Can be used in conjunction with
    # type: NodePort.
    nodePort: null

    # Optional YAML string for additional annotations.
    annotations: null

    # Optional YAML string that will be appended to the Service spec.
    additionalSpec: null

  # Envoy image to use. For Consul v1.7+, Envoy version 1.13+ is required.
  imageEnvoy: envoyproxy/envoy:v1.13.0

  # If set to true, gateway Pods will run on the host network.
  hostNetwork: false

  # dnsPolicy to use.
  dnsPolicy: null

  # Override the default 'mesh-gateway' service name registered in Consul.
  # Cannot be used if bootstrapACLs is true since the ACL token generated
  # is only for the name 'mesh-gateway'.
  consulServiceName: ""

  # Port that the gateway will run on inside the container.
  containerPort: 443

  # Optional hostPort for the gateway to be exposed on.
  # This can be used with wanAddress.port and wanAddress.useNodeIP
  # to expose the gateways directly from the node.
  # If hostNetwork is true, this must be null or set to the same port as
  # containerPort.
  # NOTE: Cannot set to 8500 or 8502 because those are reserved for the Consul
  # agent.
  hostPort: null

  # If there are no connect-enabled services running, then the gateway
  # will fail health checks. You may disable health checks as a temporary
  # workaround.
  enableHealthChecks: true

  resources: |
    requests:
      memory: "128Mi"
      cpu: "250m"
    limits:
      memory: "256Mi"
      cpu: "500m"

  # By default, we set an anti affinity so that two gateway pods won't be
  # on the same node. NOTE: Gateways require that Consul client agents are
  # also running on the nodes alongside each gateway Pod.
  affinity: |
    podAntiAffinity:
      requiredDuringSchedulingIgnoredDuringExecution:
        - labelSelector:
            matchLabels:
              app: {{ template "consul.name" . }}
              release: "{{ .Release.Name }}"
              component: mesh-gateway
          topologyKey: kubernetes.io/hostname

  # Optional YAML string to specify tolerations.
  tolerations: null

  # Optional YAML string to specify a nodeSelector config.
  nodeSelector: null

  # Optional priorityClassName.
  priorityClassName: ""

  # Optional YAML string for additional annotations.
  annotations: null

# Control whether a test Pod manifest is generated when running helm template.
# When using helm install, the test Pod is not submitted to the cluster so this
# is only useful when running helm template.
tests:
  enabled: true