purpleair

Get air quality readings from PurpleAir sensors.

Requirements

Dependencies: perl, curl, jq

Configuration

A purpleair config block looks like this:

[purpleair]
label=
command=$SCRIPT_DIR/purpleair
interval=60
SENSOR_ID=78305
#TYPE=US_AQI
#COLORS=#85df56,#fbcf4b,#f28c33,#dd4d3c,#cf79e0,#9b2f6a
#NO_COLOR=true

Finding a sensor ID

If you do not own a PurpleAir sensor, there may be one near you that you can query. Here's how to find a sensor ID:

Navigate to http://purpleair.com/map and find a reading near you.
Click on the reading to bring up a details card. (Note, sensors with a block border are indoors. You'll likely want a plain circle).
At the bottom of the card, hover over "Get This Widget", and click the "JSON" link.
The sensor ID is the value of the URL's "show" query parameter.

If you own a PurpleAir sensor, use its ID. If your sensor is configured to be private, see the PurpleAir FAQ for extra access requirements. If your sensor is public and you do not know its ID, see the instructions above to find it.

Configuration Parameters

There is one required parameter, along with some optional ones:

Parameter	Description
SENSOR_ID	Required: The PurpleAir sensor to query
TYPE	Optional: The air quality computation to perform. Default: US_AQI
COLORS	Optional: Comma-separated list of color hex values to use in place of the default colors
NO_COLOR	Optional: Any non-empty value causes color to be suppressed

TYPE

The valid values for TYPE are:

Type	Description
US_AQI	United States Air Quality Index
EU_AQI	European Air Quality Index
CA_AQHI	Canada Air Quality Health Index
IMECA	Índice MEtropolitano de la Calidad del Aire
IAS	Índice de Aire y Salud

COLORS

The COLORS parameter should be specified without spaces or quotes.

Good: COLORS=#ffffff,#aaaaaa,#888888

Bad: COLORS="#ffffff,#aaaaaa,#888888"

Bad: COLORS=#ffffff, #aaaaaa, #888888

If fewer colors are specified than the TYPE uses by default, a warning will be printed to stderr. Also, any color index higher than the maximum index given will be reduced to the maximum index.

NO_COLOR

The NO_COLOR parameter suppresses colors, so the output will use the default output color of the bar.

Any non-empty value will trigger its effect, but by convention it should be specified NO_COLOR=true.

2.8 KiB Raw Blame History